Cisco 7200 - Manual (Page 34)

Support Information for Cisco Routers
42
Cisco Active Network Abstraction 3.6 Virtual Network Element Reference Guide
OL-14112-01
DRP/0/3/CPU0:CRS-PE1#show running-config ipv4 virtual address
ipv4 virtual address 10.52.123.11 255.255.255.0
If the SDR is managed in-band the management IP address should be supplied by the customer.
The owner SDR (namely, the main router) presents all the modules that are installed on the chassis,
excluding the ports that belong to other SDRs.
The VNE of the SDR only displays the modules that are associated with the SDR in the Inventory
window of Cisco ANA NetworkVision, it does not display the fabric, fan and power supply (namely,
the shared modules).
Supported Technologies on Cisco Routers
The following sections list the objects and attributes that are supported on Cisco routers in
Cisco ANA 3.6 per technology:
• Base Logical Components, page 43
• Layer 1, page 43
• IP, page 44
• Routing Protocols, page 46
• Ethernet (Physical), page 47
• Physical Equipment, page 47
• Ethernet (Logical), page 48
• ATM, page 48
• Frame Relay, page 50
• HDLC, page 52
• MPLS, page 52
• VPN, page 54
• QoS, page 55
• Q-in-Q (Switch Port), page 56
• Q-in-Q (Routed Switch), page 57
• STP, page 57
Note For more information about the objects and attributes described in this chapter, see Cisco Active Network
Abstraction Technology Support and Information Model Reference Manual, Version 3.6.