Use your headset with your audio pl^er – Philips Casque stéréo Bluetooth User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listen to music and monitor your calis at the same time
I
With the Switchstream feature you can listen to music from your Bluetooth Stereo
enabled phone with A2DP profile support and monitor your calls at the same time.
'
You will here a ring tone even when you are listening to music while receiving a
call.With the multi-function button you switch from the music to the incoming call,
which will pause the music. Use the same button to end the active call and return
to the music after a few seconds.
Use your headset with your audio pl^er
The Philips Bluetooth audio adapter (included in the SHB6I02 and SHB6I03 sales
package) allows you to add Bluetooth wireless functionality to your Non-Bluetooth
enabled music player, so you can stream music from your player to your
headphone.
Before Initial use, pair your headset with the Philips Bluetooth audio adapter
(included in the sales package of SHB6I02 and SHB6l03).To
pair the Bluetooth
audio adapter and the headset for first use:
• Put your headset into pairing mode:
Make sure the headset is off.
Press the multi-function button until your headsets LED will flash red and
green alternately indicating that it has entered pairing mode.The headset
will remain In pairing mode for three minutes.
• Make sure the Bluetooth audio adapter is off. Press and hold the
multi-function button on the adapter until the LED flashes red and green
alternately.
• Place the Bluetooth audio adapter and the headset next to each other.
After a few seconds the LED’s on both devices will flash green.
•
Connect the jack of the audio adapter to the 3.5mm headphone socket of
any audio source such as your MP3 player, CD player etc.You are now set
up for wirelessly listening to your music from that device.