Bluetooth adapter, Getting started, Charging your headset – Philips Casque stéréo Bluetooth User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bluetooth adapter:
USB Bluetooth
LED
3.5mm Bluetooth
audio adapter
LED
iPod Bluetooth
audio adapter
On/Off
(included with SHB6I0I only) (included with SHB6I02 only)
(included with SHB6I03 only)
Getting started
Charging your headset
Before you use your headset for the first time, charge the battery of your headset
and your optional Bluetooth adapter for 6 hours for optimum battery capacity and
lifetime.
Use only the original charger (5V, 500mA). Using another charger may
damage or destroy your headset!
Plug the charger into the power outlet and connect the charger cable to the
headsets and the Bluetooth audio adapters (if applicable) charging socket' During
recharging the LED indicator will show a steady red light Charging is completed
once the LED has switched off.Typically a full charge will take 3 hours.
The iPod Bluetooth audio adapter does not need to be charged as it is powered by your iPod