Cisco OL-21851-01 - Manual (Page 20)

5-20
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Configuring MIDlets
Configuring the MIDlets IP Phone Interface
The Cisco Unified IP Phone auto-configures the IP address of the CTS; the CTS obtains the phone IP
address using CDP data and the CTS sends the command to the Cisco Unified IP Phone to start the
MIDlet. The system launch command specifies the IP address of the CTS.
To configure each Cisco Unified IP Phone 7970 Series to run the MIDlet IP phone interface:
Step 1 Log in to the Cisco Unified CM Administration interface.
Step 2 From the Navigation drop-down menu in the upper right corner, choose Cisco Unified CM
Administration and click Go.
Step 3 From the Device drop-down menu, choose Phone. The Find and List Phones Page appears.
Step 4 Search for a phone using the fields provided or choose a phone from the drop-down menu and click Find.
A list of devices appears.
Step 5 Click on a device in the Device Name (Line) column. The Phone Configuration page for that device
appears.
Step 6 From the Related Links drop-down menu in the upper right corner, choose Subscribe/Unsubscribe
Services and then click Go. The Subscribed Cisco IP Phone Services window for that device appears.
Step 7 In the Service Information box, choose MIDlet IP phone service from the Select a Service drop-down
list and click Next. The Subscribed Cisco IP Phone Services window is updated with configurable
Service Name and ASCII Service Name fields.
Step 8 Click Subscribe to save your settings or Back to return to the original Subscribed Cisco IP Phone
Services window.
If the phone is already subscribed to an older MIDlet version:
a. Unsubscribe the phone from the older service.
b. Subscribe the phone to the new IP phone service that you created in the “Creating MIDlets IP Phone
Service in Unified CM” section on page 5-19 .
Step 9 Click Save to save your settings.
Note If you are upgrading from an older XML specification identifier (XSI) user interface to MIDlets, you
must reset the phone and reset the CTS to allow the Java MIDlets application to work with the
Cisco Unified IP Phone. See the
“Managing Phone Reset and Codec Connectivity” section on page 4-7
for reset information.
Setting Phone URL Parameters for MIDlets
Make sure the default services URL is set for MIDlets. To override default settings:
Step 1 Log in to the Cisco Unified CM Administration interface.
Step 2 Choose System > Enterprise Parameters Configuration.
Step 3 In the Phone URL Parameters box, set the URL Services in the following format:
http://xx.xx.xx.xx:8080/ccmcip/getservicesmenu.jsp