Creating midlets ip phone service in unified cm – Cisco OL-21851-01 User Manual
Page 19
5-19
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Configuring MIDlets
Procedure
This section contains the following configuration tasks:
•
Creating MIDlets IP Phone Service in Unified CM, page 5-19
•
Configuring the MIDlets IP Phone Interface, page 5-20
•
Setting Phone URL Parameters for MIDlets, page 5-20
Creating MIDlets IP Phone Service in Unified CM
To create IP Phone Service in Unified CM:
Step 1
Log in to the Cisco Unified CM Administration interface.
Step 2
From the Navigation drop-down menu in the upper right corner, choose Cisco Unified CM
Administration and click Go.
Step 3
From the Device drop-down menu, go to Device Settings and click on Phone Services. The Find and
List IP Phone Services window appears.
Step 4
Click the Add New button. The IP Phone Services Configuration screen appears.
Step 5
Fill in the following fields:
a.
Service Name—Required. The Service Name must match the filename of the .jad file.
Note
Your filename must not contain the .jad extension. The .jad extension is appended automatically when
you name the file.
b.
ASCII Service Name—Required. The ASCII service name must match the configured service
name.
c.
Service Description—MIDlet UI.
d.
Service URL—Required. IP address of the Service URL must be that of the Unified CM and in the
following format:
http://xx.xx.xx.xx:6970/TSPM-y-y-y-YY.jad
The following describes the necessary Service URL content:
–
xx.xx.xx.xx is the IP address of the Unified CM server.
–
y-y-y- is the version of the MIDlet application being added to Unified CM.
–
YY is the build version of the MIDlet application being added to Unified CM.
e.
Service Category—Required. Choose Java MIDlet from the drop-down menu.
f.
Service Type—Required. Choose Standard IP Phone Service.
g.
Service Vendor Name—Must be exactly “Cisco” (case-sensitive).
h.
Service Version—Leave blank.
Step 6
Click the Enable check box.
Step 7
Click Save to save your changes.