Adding a new directory number, Configuring the directory number for a shared line – Cisco OL-21851-01 User Manual
Page 22
5-22
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Assigning a Directory Number for the Shared-Line Cisco Unified IP Phone
Assigning a Directory Number for the Shared-Line Cisco Unified
IP Phone
To assign a directory number to a shared-line Cisco Unified IP phone, perform the following tasks using
the Cisco Unified Communications Manager Administration interface.
•
Adding a New Directory Number, page 5-22
•
Configuring the Directory Number for a Shared Line, page 5-22
Adding a New Directory Number
To add a new directory number:
Step 1
Log in to the Cisco Unified CM Administration interface.
Step 2
From the Device drop-down menu, choose Phone. The Find and List Phones Page appears.
Step 3
Locate and click the highlighted Cisco Unified IP phone device that you created in the
“Adding a
Cisco TelePresence Image to the Cisco Unified Communications Manager Server” section on page 1-1
.
The Association Information window appears.
Step 4
In the Association Information window, click Line [1] - Add a new DN. The Directory Number
Configuration window appears.
Note
Use the device MAC address to help you determine which line to select. The MAC address is also used
as a device number (represented by X in this document) for the settings in the Directory Number
Configuration window.
Step 5
Proceed to the
“Configuring the Directory Number for a Shared Line” section on page 5-22
to configure
the directory number for a shared line in the Directory Number Configuration window.
Configuring the Directory Number for a Shared Line
Note
You must restart your system after you have completed the configuration tasks in this section.
To configure the directory number for a shared line, perform the tasks in the following sections. When
you are finished configuring your settings, click Save and follow the prompts to restart the system.
•
Configuring Directory Number Information, page 5-23
•
Enabling Auto Answer Option, page 5-23
•
Call Forward and Call Pickup Settings, page 5-23
•
•
•