Panasonic SPX900 - Manual (Page 77)

77
6
6-2 Thumbnail Screen
Press the THUMBNAIL button to display the thumbnail screen
on the LCD monitor. Pressing the THUMBNAIL button again
returns the display to the regular display. When switching is done
from the regular screen display to the thumbnail screen display,
all the clips will be displayed on the thumbnail screen.
Also, pressing the MENU BAR button in the thumbnail screen
moves the pointer to the menu bar and enables thumbnail menu
manipulation.
<Note>
With the TCG switch positioned at [SET], when the time code or
user bits are set or when camera menus are being manipulated,
thumbnails cannot be manipulated.
Display Mode
Indicates the thumbnail types displayed on the screen.
ALL: Display all clips.
SELECTED:
Display randomly selected clips.
MARKED: Display clips with shot marks.
VOICE MEMO:
Display clips with voice memo data.
SLOT: Display clips in the specified P2 card.
Please refer to [6-5 Switching the Thumbnail Display] for
more information.
Slot Number
Indicates the P2 card in which the clip under the pointer is
recorded. The slot number of the P2 card that contains the
clip is displayed in yellow.
If the clip is recorded across multiple P2 cards, all the slot
numbers of the P2 cards that contain the clip are displayed.
The slot numbers of the other P2 cards, if inserted, are
displayed in white.
Clip Number
The numbers set by the camera for all the clips recognised
correctly by the P2 card. These numbers are allocated in
chronological order, by shooting dates and times.
Thumbnail
The image captured immediately after you start shooting is
displayed as a thumbnail.
Time Display
You can set this to display the time code at the start of clip
recording, the user bits at the start of clip recording, the
shooting time, the shooting date or the shooting and date.
Please refer to [6-12 Setting the Thumbnail Display Mode]
for more information.
The factory setting is the time code at the start of clip
recording.
Menu Bar
The Menu Bar includes menus for manipulating clips and
switching/setting the thumbnail display.
Press the MENU BAR button on the thumbnail screen to
manipulate the menu bar. Use the cursor (
) and SET
buttons to select the menu.
THUMBNAIL:
To switch the thumbnail display and set the display mode.
OPERATION:
To delete clips and format a P2 card.
PROPERTY:
To display clip properties and P2 card status.
EXIT:
To return the pointer to the thumbnail.
Incomplete Clip Indicator
Indicates that although a clip is recorded across multiple P2
cards, one of these cards is not inserted into a P2 card slot.
Voice Memo Indicator
This marker is displayed for a clip with a voice memo
attached. Please refer to [6-7 Voice Memo] for more
information about voice memos.
Wide Clip Indicator
This marker is displayed for clips recorded with the 16:9
aspect ratio.
Shot Mark Indicator
This marker is displayed for a clip with a shot mark attached.
Please refer to [6-6 Shot Mark] for more information about
shot marks.
Defective Clip Indicator
This marker is displayed for defective clips, which may result
from a variety of causes, e.g., powering-down during
recording.
A clip displayed with a yellow corrupt marker can be
restored. Please refer to [6-9 Restoring Clips] for more
information.
A clip displayed with a red corrupt marker cannot be
restored and must be deleted. If the clip cannot be deleted,
format the P2 card.
Thumbnail Screen