Casio DT-800RF - Manual (Page 31)

Software Management
Synchronizing Configuration Files
Click to put a check in the Synchronize Configuration Files box to enable automatic
synchronization of configuration files on the terminal. When the terminal is command
booted, its configuration files will be compared with the most recent on the PC. The
terminal is updated automatically if it does not have the latest revision.
Synchronizing Program Files
Click to put a check in the Synchronize Program Files box to enable automatic
synchronization of program files on the terminal. When the terminal is command booted,
its program files will be compared with the most recent on the PC. The terminal is
updated automatically if it does not have the latest revision.
Automatic IP Address Assignment
New terminals will be assigned IP addresses automatically if the following box is
checked.
Note: Do not check this option if a DHCP server is configured to manage address
assignments.
To set the addresses, click on the Addresses button to access the Segment Address
Assignments dialog box, as shown in the following figure.
Enter the desired range in the From and To boxes as shown above, and then click on
Add.
Supported Equipment Manual
• March, 2006 2-23