Casio DT-800RF - Manual (Page 43)

Error Message Resolution Guide
Message Reason Solution Reference Tech Note
Connection ERROR.\nREBOOT
MOBILE UNIT; Could not Connect. Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
T1113, T1114, T1161,
T1171, T1187 and
T1194
Disconnect ERROR.\nREBOOT
MOBILE UNIT; Could not Disconnect. Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
T1113, T1114, T1161,
T1171, T1187 and
T1194
RF Send ERROR.\nREBOOT MOBILE
UNIT; Could not Send. Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer’s environment. T1113, T1114, T1161,
T1171, T1187 and
T1194
RF Receive ERROR.\nREBOOT
MOBILE UNIT; Could not Receive. Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer’s environment. T1113, T1114, T1161,
T1171, T1187 and
T1194
RF Check ERROR.\nREBOOT
MOBILE UNIT; Could not run the RF Survey. Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer’s environment. T1113, T1114, T1161,
T1171, T1187 and
T1194
RF Timeout ERROR.\nREBOOT
MOBILE UNIT; Have been trying to contact the
host for the radio timeout period (2
minutes default). Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer’s environment. T1113, T1114, T1161,
T1171, T1187 and
T1194
REBOOT MOBILE UNIT; Reboot the Mobile Unit do to loss
of connection. Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer’s environment. T1113, T1114, T1161,
T1171, T1187 and
T1194
Retry (Y/N)?; Try again. Try to send or receive again, or perhaps
ensure that the printer is cabled to the
Mobile Unit and is on.
---
Supported Equipment Manual
• March, 2006 4-3