Philips Stereo-TV - Manual (Page 10)

Timer function
This menu lets you use the TV set as an alarm Q
clock. 0
From the MAIN MENU, Highlight Q
FEATURES and press the cursor right key. 0
Highlight TIMER and press the cursor right
key. ©
The following items will be displayed:
INSTALLATION
Time --: --
Start Time - : -
Stop Time - : -
Pr Nr 00
Activate OFF
Time : enter the current time.
Start Time : enter the start time.
Stop Time : enter the stop time.
Program No. : enter the number of the
desired programme for the wake-up alarm.
Activate : you can set:
• Once for a single alarm,
• Daily for each day,
• Off to cancel.
Press @) to put the TV set in standby.
It will automatically come on at the time
programmed. If you leave the TV set on, it will
just change programmes at the time entered
(and go into standby mode at the Stop Time).
© Sleep: to select an automatic standby period.
This menu lets you block use of the TV set.
O From the MAIN MENU, Highlight
FEATURES and press the cursor right key.
Q Highlight CHILDLOCK and press the cursor
right key.
INSTALLATION
0
You must enter your secret access code.
The first time, key the code 0711.
The menu is displayed.
O
The next time you switch on the TV set, you
must enter your secret access code to access
the programmes.
© To cancel switch Child Lock to OFF.
©To change the code select New Code and
enter a new 4 figure code. Confirm by
entering a second time.
¡f you hove forgotten your secret code, enter the
universal code 0711.
O Press m several times to exit the menus.