Philips Stereo-TV - Manual (Page 6)

Remote control keys
(Only available in certain versions - Addendum p.4)
o
o
e
o
o
o
o
o
0
Radio / TV mode
To switch the TV set to radio or TV mode (for
versions equipped with radio).
Surround Sound (only available on certain versions).
To activate / deactivate the surround sound effect.
In stereo, this gives the impression that the
speakers are further apart. For models equipped
with Virtual Dolby Surround*, you can experience
Dolby Surround Pro Logic sound effects. In mono, a
stereo spatial effect is simulated.
Screen information / permanent no.
To display / clear the program number, name (if it
exists), time, audio mode and time remaining for the
sleep feature. Press the key for 5 seconds to activate
permanent display of the number.
Pre-set sound
Used to access a series of stored settings: Voice,
Music, Theatre and return to Personal.
Menu
To call up or exit the menus.
Cursor / Format
These 4 keys are used to navigate through the
menus. The (3(3 keys are used to enlarge or
compress the picture vertically.
Volume
To adjust the sound level.
Mute
To mute or restore the sound.
Number keys
Direct access to the programmes. For a 2 digit program,
enter the 2nd digit before the dash disappears.
Sleep
To select an automatic standby after a preset time
(from 0 to 180 minutes).
Standby
Lets you place the TV set on standby. To turn on the
TV, press P-0 ©, ® to ® (or (M)).
Sound mode
Used to force programmes in Stereo to Mono or,
for bilingual programs, to choose between Dual I or
Dual-ll. For TV sets equipped for Nicam reception,
depending on the programmes, you can force the
Stereo Nicam sound to Mono or select between
Nicam Dual I, Nicam Dual-ll and Mono.
The Mono indication is red when in forced position.
Teletext keys (p. 9)
Pre-set image
Used to access a series of stored settings: Rich,
Natural, Soft, Multimedia and return to Personal.
Teletext (p. 9)
Program selection
To access the next or previous programme. The
number, (name) and sound mode are displayed for a
few moments.
For some programs, the title of the program will be displayed
at the bottom of the screen.
Selection of EXT socket
Press several times to select EXT and AV.