Capresso Impressa Z5 - Manual (Page 25)

a. Push the Rotary Dial. SELECT PRODUCT .
b. Push the beverage button for which you want to change the
temperature, e.g. the 1-cup Espresso Button. The display
shows
1 ESPRESSO HIGH .
c. Turn the Rotary Dial and select NORMAL (example).
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. TEMPERATURE . To change another beverage button start
with a. again.
26.3 COFFEE STRENGTH / AROMA
You can set the coffee strength for the Cappuccino Button, the
Special Coffee Button and the four coffee buttons on the right
side to
XMILD , MILD , NORMAL , STRONG , XSTRONG . For
factory settings see chapter 5. In XMILD the 1-cup buttons grind
for about 4 seconds, in XSTRONG for about 8 seconds. The 2-
cup buttons grind between 7 and 10 seconds respectively. The
minimum amount of coffee to be ground is approx. 5 grams, the
maximum approx. 16 grams.
Please note: the amount of ground coffee also depends on the
fineness settings of the burr grinder. The coarser the setting the
more coffee is ground through the burrs.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER .
• Turn the dial until the display shows: AROMA
a. Push the Rotary Dial. SELECT PRODUCT .
b. Push the beverage button for which you want to change the
coffee strength, e.g. the 2-cup Coffee Button. The display
shows
2 COFFEE NORMAL .
c. Turn the Rotary Dial and select XSTRONG .
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. AROMA . To change another beverage button start with a.
26.4 CAPPUCCINO PROGRAMMING
Chapter 25.2 explains how to change the pre-sets for milk and
the coffee volume while the Z5 is brewing. In programming you
can simply change the pre-sets by changing the values shown in
the display without making the beverage.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER .
• Turn the dial until the display shows: CAPPUCCINO
a. Push the Rotary Dial. The display shows MILK 15 SEC
b. Turn the Rotary Dial until the desired duration is displayed,
e.g. MILK 20 SEC .
c. Push the Rotary Dial to confirm. CONFIRMED ✔ .
Now the display shows COFFEE 3 OZ .
d. Turn the Rotary Dial until the desired coffee volume is
displayed, e.g. to COFFEE 5 OZ .
e. Push the Rotary Dial to confirm. CONFIRMED ✔
Now the display shows CAPPUCCINO MILK 20 SEC .
f. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
26.5 MILK PROGRAMMING
Chapter 25.3 explains how to change the pre-sets for milk
volume while the Z5 is brewing. In programming you can simply
change the pre-set by changing the duration shown in the
25.