Playing a disc, Selecting a different track ^ j, Finding a passage within a track – Philips MC10537 User Manual

Page 14: Seiecting a different track, Cd operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD Operation

IMPORTANT:

The lens of the CD player should never be

touched.

Playing a disc

This CD player plays Audio Discs including CD-

Recordables and CD-Rewritables.

• CD-ROM, CD-I, CDV, VCD, DVD or computer

CDs, however, are not possible.

1

Select

CD

source.

2

Press

OPEN'CLOSE

on the top

of the system to open the CD

compartment.

-> uPTfJ is displayed when you

open the CD compartment.

3

Insert a disc with the printed side facing up and

press down on

OPEN'CLOSE

to close the

CD door

•4 RERU is displayed as the CD player scans the

contents of a disc, and then the total number of

tracks and playing time are shown.

4

Press

PLAY-PAUSE

►!! (on the remote

control ►!!) to start playback.

Current track number and elapsed playing

time of the track are displayed during disc

playback.

5

To interrupt playback press

PLAY-PAUSE ►!!

(on the remote control ►!!). Press

PLAY-PAUSE

►!! (on the remote control ►!!)

again to resume play.

The display freezes and the elapsed playing

time flashes when playback is interrupted.

6

To stop disc playback, press

STOP ■.

Note: CD play will also stop when;

- the CD door is opened.

- the disc has reached the end.

- you select another source; TAPE,TUNER orAUX,

- you select to standby.

**

- you press the tape deck PLAYkey.

*

Selecting a different track ^ j

Press

PREV

or

NEXT

(on the remote

control M or ►!) once or repeatedly until the

desired track number appears in the display. -

If you have selected a track numberiishortly after

loading a disc or in the PAUSE position, you will

need to press

PLAY-PAUSE Ml

(on the

remote control ►!!) to start playback.

Finding a passage within a track

1

Press and hold down on

PREV

or

NEXT

►►I (on the remote control or ►► ).

-> The disc is played at high speed and low

volume.

e

2

When you recognize the passage you want,

release

PREV

or

NEXT

(on the

remote control

or ►► ),

-> Normal playback continues.

Note:

- During a disc program or if SHUFFLE/ REPEAT

active, searching is only possible within the same

track.

14

Advertising