Setting the clock, Setting the timer, Activating and deactivating timer – Philips MC10537 User Manual
Page 19: Activating and deactivating, Sleep, Setting the ciock, Activating and deactivating sleep, Clock/timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clock/Timer
Setting the clock
1
In standby; press
CLOCK.
-► The clock digits for the hours flash.
2
Turn
VOLUME
to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3
Press
CLOCK
again.
-♦ The clock digits for the minutes flash.
4
Turn
VOLUME
to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5
Press
CLOCK
to confirm the time.
Setting the timer
•
The system can be used as an alarm clock,
whereby the CD orTUNER is switched on at a
set time.The clock time needs to be set first
before the timer can be used.
•
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically,
1
In any mode, press
TIMER ON*OFF
for more
than 2 seconds.
2
Turn
VOLUME
clockwise (or press
SELECT
SOURCE)
to select sound source.
3
Press
TIMER ON'OFF
to confirm your
desired mode.
The selected source
or
is shown. The clock digits for the hours flash.
4
Turn
VOLUME
to set the hours: clockwise for
hours up; counter-clockwise for hours down.
Press
TIMER ON*OFF
again.
-> The clock digits for the minutes flash.
Turn
VOLUME
to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
Press
TIMER ON*OFF
to confirm the time.
-♦ The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER ON*OFF
once.
-> Display shows
timer
if activated, and f
disappears if deactivated,
---------------------------------------------------------- Ц-----------
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of tiijie.The dock time
needs to be set first before the sleep timer can
be used.
Press
SLEEP
on the remote
control once or more.
-* Display shows BLEEP and
one of the sleep time options
in sequence: Gu, HG, 30, IG,
GEGGP nrr.Gu... if you have
selected a time. Once SLEEP is activated, BLEEP
utJ scrolls across the display at repeated •
intervals.
To deactivate,'press
SLEEP
on the remote
control once or more until BLEEP OEI- is
shown, or press
STANDBY ON
on the system
or remote control.
GEGGP uEE scrolls across the display.
19