Cobra Electronics XRS 989 - Manual (Page 14)

Settings
Your Detector
Nothing Comes Close to a Cobra ® 23
Settings
Your Detector
22 English
Alert Settings
•
Pop Alert
When Pop Detect mode is On, Pop radar signals will be detected and an alert will
be given. During the alert, the unit will continue to detect other signals. The factory
setting is Pop Detect Off.
X Band Alert
When X Band Detect mode is On, X Band radar signals will be detected and
an alert will be given. During the alert, the unit will continue to detect other signals.
The factory setting is X Band Detect On.
K Band Alert
When K Band Detect mode is On, K Band radar signals will be detected and an
alert will be given. During the alert, the unit will continue to detect other signals.
The factory setting is K Band Detect On.
Ku Band Alert
When Ku Band Detect mode is On, Ku Band radar signals will be detected and an
alert will be given. During the alert, the unit will continue to detect other signals.
The factory setting is Ku Band Detect Off.
VG-2 Alert
The detector is undetectable by VG-2 detection devices and can alert you when such
a device is in use near your vehicle. When VG-2 Detect mode is On, VG-2 signals will
be detected and an alert will be given. During the alert, the unit will continue to
detect other signals. The factory setting is VG-2 Detect Off.
VG-2 Audio Mode
When VG-2 Audio mode is On, alerts will be sounded as well as being displayed on
the screen. This setting is only available if VG-2 Alert is On.
The factory setting is VG-2 Audio Off.
Spectre 1 Alert
The detector is undetectable by Spectre 1 detection devices and can alert you
when such a device is in use near your vehicle. When Spectre 1 Detect mode is
On, Spectre 1 signals will be detected and an alert will be given. During the alert,
the unit will continue to detect other signals. The factory setting is Spectre 1
Detect Off.
Spectre 1 Audio Mode
When Spectre 1 Audio mode is On, alerts will be sounded as well as being
displayed on the screen. This setting is only available if Spectre 1 Alert is On. The
factory setting is Spectre 1 Audio Off.
Safety Alert
When Safety Alert mode is On, Safety Alert radar signals will be detected
and an alert will be given. During the alert, the unit will continue to detect other
signals. The factory setting is Safety Alert On. Strobe Alert remains On when Safety
Alert is turned Off.
Car Battery Low Voltage Warning
In addition to displaying system voltage, your detector can provide a
warning that battery voltage is low so that timely steps can be taken to
correct the problem. The Car Battery Low alert is triggered when the
voltage drops below 11.9 volts. Following the alert, the unit enters
SmartPower mode to avoid further draining your car battery.
The factory setting is Car Battery Low Off.
NOTE
For alerts available only with the
optional GPSL unit, see page 36.