Getting started, Standby screens, Main standby screen – Cobra Electronics XRS 989 User Manual

Page 7: I-mute/city or hwy mode, Car voltage, Compass, Speed, Lat/lon

Advertising
background image

Nothing Comes Close to a Cobra

®

9

8

English

Getting Started

Getting Started

Standby Screens

Press Mute

6

while the down arrowhead is displayed at the top center of

any Standby screen to cycle through and select a different screen.

The Standby screens will be displayed in the following order:

NOTE
Compass will display if either the magnetic
compass in the detector unit is turned On
and calibrated or the

Optional GPSL unit is

installed and receiving a signal. Speed and
and Latitude/Longitude (marked with an *) will
display only if the

Optional GPSL unit is installed

and receiving a signal.

NOTE
Last Standby screen viewed
will be displayed when exiting
Display Timeout mode.

Your Detector

Your Detector

Main Standby Screen

Displays the maximum possible information about the
detector and its settings. The GPSL icon will show only
if the

Optional GPSL unit is connected. The compass will

show as described in the note on page 7.

I-Mute/City or Hwy Mode

Displays the status of alert filtering (City mode) and automatic
muting (IntelliMute mode). See pages 16 and 17 to set these
features.

Car Voltage

Displays voltage level of your car battery. An alert will sound
if the voltage drops below 11.9 volts and the
Low Car Voltage Alert has been set. See page 23 to
turn On the alert.

Compass

The compass indicates driving direction if either the magnetic
compass in the detector unit is turned On
and calibrated or the

Optional GPSL unit is installed

and receiving a signal. If neither is active the center
of the compass icon will show two bars.

Speed

If the

Optional GPSL unit is installed and receiving a signal

the vehicle's speed will be shown. An alert chime will sound
if the speed exceeds the Speed Alert Setting, Speed Alert has
been turned On, and an alert speed
has been set. (You can select mph or km/h in Menu mode.)
All radar, laser, strobe and safety alerts take priority over this
alert.

Lat/Lon

If the

Optional GPSL unit is installed and receiving a signal

the vehicle's present location will be shown.

Main Standby

Screen

Speed

Car Voltage

I-Mute

City/Hwy Mode

Latitude/Longitude

Compass

*

*

Advertising