Canon A70 - Manual (Page 145)

140
Connecting the Camera to a Printer
You can make clear prints swiftly and easily when you
connect the camera to an optional direct print function
compatible printer (CP Series) or a direct print function
compatible Bubble Jet printer (sold separately). It can also
be used with DPOF print settings.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
You are recommended to use the optional AC Adapter Kit
ACK600 (p. 195) to power the camera when it is con-
nected to the printer or else load fully charged NiMH
batteries (p. 193) or unused alkaline batteries.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Please refer to the System Map supplied with your
camera for direct print function compatible printer (CP
Series) information.
• Please see your printer’s user guide for instructions on
loading paper and installing ink cartridges.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connecting to a Direct Print Function Compatible
Printer (CP Series)
Two direct interface cables are supplied with the printer.
Use the cable (DIF-100) that has a
symbol on the
connector to connect to this camera.
1
Turn off the camera (p. 30).
2
Attach the power cable to the printer and
plug the other end into power supply, or
install the printer’s rechargeable battery.
Depending on the type of printer you have, it may or may
not use rechargeable batteries. Refer to your printer’s user
guide.