Canon A70 - Manual (Page 148)

143
Pr
inting, T
ransf
err
ing
4
Set the mode switch to and turn the
camera on.
appears on the camera LCD
monitor when the BJ printer is
properly connected to the
camera.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• On Bubble Jet printers with operation panels, images
cannot be printed through the operation panel while the
camera is connected.
• The following operations cannot be performed while the
printer is connected.
- Replaying movies
- Setting the language using the
and the
button combination.
• When the printer is disconnected, the or symbol
will disappear from the LCD monitor and the camera will
revert to standard replay mode.
• Please use the following procedures when you detach
the cable from the printer and the camera.
1. Detach the cable from the printer.
2. Turn off the camera power.
3. Detach the cable from the camera.
• When you detach the cable from the camera, hold the
plug and do not pull by the cable.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○