Cisco 7985G - Manual (Page 31)

Basic Call Handling
Cisco Unified IP Video Phone 7985G Phone Guide 25
Forwarding Your Calls to Another Number
You can use Call Forward All to redirect your incoming calls from your Cisco Unified IP Video Phone
to another number. Call Forward All can only be used on your primary line.
Note Enter the Call Forward All target number exactly as you would dial it from your desk phone.
For example, enter an access code such as 9 or the area code, if necessary.
If you want to... Then...
Set up call forwarding on your
primary line Press CFwdALL and enter a target phone number.
Cancel call forwarding on
your primary line Press CFwdALL.
Verify that call forwarding is
enabled on your primary line Look at the status line and call state icon for the line. When call
forwarding is enabled, a message appears in the status line to indicate
the number to which calls are being forwarded, and this icon appears
above the primary line:
(Call forward icon).
Tips
• You can forward your calls to a traditional analog phone or to another Cisco Unified IP Video
Phone, although your system administrator may restrict the call forwarding feature to numbers
within your company.
You must configure this feature per line; if a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.