Kyocera Brigadier - Manual (Page 134)

Settings 123
2. Tap and select the Auto-sync data check box.
View Data Usage
1. From the Home screen, tap > Settings > Data usage.
2. Confirm Mobile data access is set to on.
3. Tap next to Data usage cycle to change the period of time for which the chart will
display the data usage.
4. Tap either of the black lines on the chart to display the tabs. Drag the black tabs
horizontally to see the data usage of a specific period within the displayed cycle.
 The usage amount will be displayed below the chart, followed by the usage amount
by each application. Tap an application to see further details.
Limit Mobile Data Usage
You can set a limit to your data usage in case you don’t have an unlimited data plan.
Warning: The usage displayed is measured by your phone. Your carrier’s data usage
accounting may differ and the usage in excess of your data limit plan can result
in charges. The data usage limit set in this menu is not guaranteed to prevent
additional charges.
1. From the Home screen, tap > Settings > Data usage.
2. Select the Limit mobile data usage check box. Read the message and tap OK.
3. Drag the red tab vertically to set the limit you want.
– or –
Tap the red line, select the limit by scrolling the value and then tap Set.
 When your data usage reaches the limit, mobile data will be turned off automatically.
Alert About Data Usage
Your phone will warn you with an alert when the mobile data usage reaches a set level.
1. From the Home screen, tap > Settings > Data usage.
2. Select the Alert me about data usage check box. Read the message and tap OK.
3. Drag the orange tab vertically to set the level you receive a warning.
– or –