Sharp AQUOS Crystal - Manual (Page 11)

Get Started 1
Get Started
The following topics give you all the information you need to set up your phone and service the first
time.
Note: Screenshots in the user guide may appear differently on your phone.
Your Phone at a Glance
The following illustration outlines your phone’s primary external features and keys.
Set Up Your Phone
You must first charge the battery to begin setting up your phone.
CAUTION! Do not pull or twist cables forcefully. Doing so may break wires.
Important: To help maintain performance and internal battery life, do not store when the battery is
full (immediately after charging is complete) or exhausted (too low for the phone to turn on). Battery
level should be at approximately 40% for optimal storage.
Note: Depending on usage, bulges may appear near end of battery life; this does not affect safety.
Note: Your phone does not charge while flash is shining. Turning on flash with a low battery level
may cause your phone to close the camera even while charging.
1. Charge your battery.