Reconnect a headset or car kit, Disconnect or unpair from a bluetooth device – Sharp AQUOS Crystal User Manual

Page 119

Advertising

Tools and Calendar

109

3. Make sure that the headset is discoverable, so that your phone can find the headset. Refer to the

instructions that came with the headset to find out how to set it to discoverable mode.

4. Touch SEARCH FOR DEVICES. Your phone will start to scan for Bluetooth devices within

range.

5. When you see the name of your headset displayed in the “AVAILABLE DEVICES” section,

touch the name. Your phone then automatically tries to pair with the headset.

6. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in the
“PAIRED DEVICES” section. When the Bluetooth headset or car kit is connected to your phone, the

Bluetooth paired icon

is displayed in the status bar. Depending on the type of headset or car kit

you have connected, you can then start using the headset or car kit to listen to music or make and
receive phone calls.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be possible
with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and turning on the headset. However, sometimes you will
need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.

1. From home, touch

> Settings

> Bluetooth.

2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on

3. Make sure that the headset is discoverable.

4. Touch the headset’s name in the “PAIRED DEVICES” section.

5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit

documentation to find the passcode.

6. If you still cannot reconnect to the headset or car kit, follow the instructions in

Disconnect or

Unpair from a Bluetooth Device

, and then follow the instructions in