Sharp AQUOS Crystal - Manual (Page 121)

119
Camera
AQUOS CRYSTAL
Using Internal Camera
Use Internal Camera to record self or others with Lens on
Display side.
・Tap to toggle Internal/External Camera.
・Some functions/settings are not available for Internal
Camera.
Troubleshooting
Q. Cannot open Video Camera/Video Camera exits suddenly
A. Video Camera does not open if battery level is low.
Charge Battery first.
A. Continuing to use Video Camera while handset is warm
causes warning to appear, after which Video Camera
saves captured video data and exits.
A. Video Camera exits automatically after a period of
inactivity.
Q. Image is dark/grainy
A. Is there a strong light near the subject, or a strong
light source in the screen? Avoid letting a strong light
source (the sun, light, etc.) in the screen. Leaving
handset in a warm place for a long time or where
Camera is in direct sunlight for a long time may affect
image quality.
Q. Cannot focus
A. Fingerprints, etc. on lens cover prevent Camera from
focusing. Wipe clean with a dry, soft cloth.
Q. Image captured with Mobile Light appear whitish
A. A finger or cover near the lens can reflect light from
Mobile Light and cause captured image to appear
whitish.
Video Viewfinder Layout and Functions
Layout and functions of main indicators are as follows.
If icons such as
are not shown, Tap in Video
Viewfinder.
Mode button: Change to settings optimal for the subject
and shooting conditions
GPS: Set whether to add location information
Size: Change the picture size
NightCatch: Capture dark scenes more brightly
Shooting time left: Time available with current settings
Mini-preview 1 : Shortcut to Album, or preview of
immediately captured video; check, send, or delete
shown video
View switch: Simple mode/Detailed mode
Settings: Access various Camera settings
Camera switch: Internal/External Camera
Mobile Light: Settings switch
Start recording
Video Camera/Camera switch: Tap to capture photos
1 In Simple mode, no longer appears after a period of
inactivity.