Sharp AQUOS Crystal - Manual (Page 219)

217
For Assistance
AQUOS CRYSTAL
Specifications
Handset
Handset specifications are as follows.
・Times below were measured with Automatic brightness
disabled, Brightness set to medium.
・Times below vary with location, status, settings, etc.
・Display employs precision technology; however, some pixels
may remain on/off.
Item Description
Weight 140 g (with Internal Battery)
Internal
Battery
Capacity
2,040 mAh
Continuous
Talk Time
1
3G: 800 minutes
GSM: 510 minutes
Continuous
Standby
Time
2
3G: 620 hours
GSM: 570 hours
4G (AXGP Network): 480 hours
4G (FDD-LTE Network): 530 hours
Charging
Time
3
AC Charger (SHCEJ1): 150 minutes
AC Charger (ZTDAC1; Micro USB, 1.0 A):
150 minutes
Dimensions (W
x H x D) 67 mm x 131 mm x 10 mm (without
protruding parts)
Maximum
Output
3G: 0.25 W
GSM (900 MHz): 2 W
GSM (1800 MHz, 1900 MHz): 1 W
4G: 0.2 W
Maximum
Transmission
Speed
4
SoftBank 4G: 110 Mbps in downlink, 10
Mbps in uplink
SoftBank 4G LTE: 75 Mbps
5 in downlink,
25 Mbps in uplink
1 Average measured with handset fully charged, in strong
signal conditions at rest.
2 Average measured with handset fully charged, without
calls or operations, in strong signal conditions at rest, and
with Data transmission and Urgent News disabled. May
vary with battery strength, ambient temperature, settings,
etc.
3 Measured with power off using AC Charger.
4 Provided on a best-effort basis; transmission speed may
decrease or transmission may become unavailable due to
traffic conditions, network environment, etc. In addition,
transmission speed varies by area.
5 Depending on area, maximum downlink speed is set to 37.5
Mbps.
In some areas, maximum downlink speed of 112.5 Mbps is
supported.
For Network coverage information, see SoftBank Mobile
Website (such information may be available in Japanese
only).
Materials
Parts Material/Finishing
Cabinet
(Display-side) PA resin + GF resin/evaporated, UV
coating
Cabinet (Back) PC resin/coated
Battery Cover PC resin + ABS resin/coated, UV coating
Power Key PC resin/evaporated, UV coating
Volume Up/
Down Key
PC resin/evaporated, UV coating
Display
Acrylic resin/UV hard coating, infrared
transparent printing
Camera
Window Acrylic resin/anti-soiling treatment, rear-
printed
Mobile Light
Window
PC resin
USIM Card
Slot
Stainless steel/tin plating
SD Card Slot Stainless steel/tin plating
Protective
Sheet
PC resin/printed
Speaker
Screen
PE/dyed
Speaker Sheet PET/rear-printed
External
Device Port
Stainless steel/tin plating
Screws Iron/chrome plating