K-Edge K13-440 - Manual (Page 2)

Parts Included:
 K13-440

1x GO BIG ¼”-20 Pro Handlebar mount
 1x ¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
 1x Silicone O-Ring (Orange) Dash #107
 1x M2.5 x 0.45 x 5mm SHCS ‘Alignment Bolt’
 2x M4 x 12mm SHCS ‘Clamp Bolts’
 K13-450: (Adapter Only – GO BIG Mounts Required)
 1x GO BIG ¼”-20 Adapter mount
 1x ¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
 1x Silicone O-Ring (Orange) Dash #107
 1x M2.5 x 0.45 x 5mm SHCS ‘Alignment Bolt’
 K13-460

1x GO BIG Pro Saddle Rail mount
 1x GO BIG ¼”-20 Adapter mount
 1x ¼”-20 Thumbscrew w/ head Keyed to 5mm Hex
 1x Silicone O-Ring (Orange) Dash #107
 1x M2.5 x 0.45 x 5mm SHCS ‘Alignment Bolt’
 2x M4 x 8mm FHCS
 2x M5 x 16mm FHCS
Tools/Items Required:
 Metric Allen Set (3mm for clamp bolts, 4mm for mounting bolts, and 5mm for Thumbscrews)
 Torque wrench
Note: (Applies to: K13-400/410/420/430/460) Prior to installation please ensure that the camera mounting bolt is installed
correctly.