Kenton Pro-Solo mk1 User Manual
Page 5
4 LFO MIDI SYNC (default: off)
Range, off [of], 1 to 96
- Allows the LFO waveform to be synchronised to MIDI clock, with a variable divide ratio.
The LFO waveform will automatically adjust its length so that it will start at the beginning
of a bar, and last for whatever musical time it is set for (see below for divide ratios).
A divide ratio can be set, so the LFO only retriggers every so many MIDI clock messages;
If set to 1, there will be 1 cycle of the LFO for every 1 MIDI clock. (i.e. 24 cycles per
quarter note). If set to 24, there will be 1 cycle of the LFO for every 24 MIDI clocks. (i.e. 1
cycle of the LFO per quarter note).
Note; MIDI sends 24 clocks per quarter note.
Below is a table of values you can set the divide ratio to to obtain LFO cycles of various
musical lengths:
Note type;
Divide ratio;
Semibreve
96
Minim
48
Crotchets
24
Crotchet triplets
16
Quavers
12
Quaver triplets
8
Semiquavers
6
Semiquaver triplets
4
Demisemiquavers
3
Demisemiquaver triplets
2
5 LFO to CV controller number (default: 1)
The following can be selected;
Off
[Of]
Pitch bend
[Pb]
Velocity
[VL]
Aftertouch
[Af]
MIDI controllers
0 to 120
6 LFO to AUX controller (default: 17)
- Sets which Controller will control the LFO depth applied to the auxiliary.
The following can be selected;
Off
[Of]
Pitch bend
[Pb]
Velocity
[VL]
Aftertouch
[Af]
MIDI controllers
0 to 120