Info for connecting pro-2 to various mono synths – Kenton Pro-2 User Manual
Page 12
_________________________________________________________________
INFO FOR CONNECTING PRO-2 TO VARIOUS MONO
SYNTHS
_________________________________________________________________
MINIMOOG
KENTON PRO-2
ADDITIONAL INFORMATION
OSCILLATOR INPUT
(1/4" jack)
CV CHAN (A)
The oscillator input on this synth is affected by the last
note
played on the Minimoog keyboard
S-TRIG INPUT
(Cinch-Jones)
S-TRIG (A)
See note 1 below re Cinch Jones connectors.
FILTER INPUT
(1/4" jack)
AUX 1 (A)
See note 5 below re FILTER
LOUDNESS
(1/4" jack)
AUX 2 (A)
MOOG PRODIGY
KENTON PRO-2
ADDITIONAL INFORMATION
KBD IN/OUT
(1/4" jack)
CV CHAN (A)
EARLY MODELS HAVE NO CV, GATE OR FILTER
INPUTS FITTED AS STANDARD
(although we can fit them for you - see notes)
S-TRIG IN/OUT
(1/4" jack)
S-TRIG (A)
Some Prodigy synths have the Cinch Jones connector
for s-
trig input- see note #1
VCF IN
(1/4" jack)
AUX 1 (A)
See note 5
MOOG ROGUE
KENTON PRO-2
ADDITIONAL INFORMATION
CV IN
(ring of 1/4" stereo jack)
CV CHAN (A)
See note 7 below for connections to ring of stereo jack
V-TRIG IN
(ring of 1/4" stereo jack)
GATE (A) Do not use the S-TRIG connection on this synth as it
sometimes causes unpredictable results
MOOG SOURCE
KENTON PRO-2
ADDITIONAL INFORMATION
CV IN/OUT
(ring of 1/4" stereo jack)
CV CHAN (A)
See note 7 below for connections to ring of stereo jack
S-TRIG IN/OUT
(ring of 1/4" stereo jack)
S-TRIG (A)
If the level 2 EXT TRIG on the Source is set to off, all
external
triggers are defeated.
ROLAND SH-101
KENTON PRO-2
ADDITIONAL INFORMATION
CV INPUT
(3.5mm jack)
CV CHAN (A)
We can fit additional filter and modulation control
sockets to
the SH-101
GATE INPUT
(3.5mm jack)
GATE (A)
EXT CLK IN
(3.5mm jack)
ARP CLK will run the internal sequencer in time with MIDI - do not use
at the same time as the CV & gate
SEQUENTIAL PRO-ONE
KENTON PRO-2
ADDITIONAL INFORMATION
CV IN
(1/4" jack)
CV CHAN (A)
GATE IN
(1/4" jack)
GATE (A)
FILTER IN
(1/4" jack)
AUX 1 (A)
See note 5
KORG MS-20
KENTON PRO-2
ADDITIONAL INFORMATION
VCO 1+2 CV IN
(1/4" jack)
Hz/V CHAN (A)
Requires the PRO-2 Hz/V option to be fitted
TRIG IN
(1/4" jack)
S-TRIG (A)
Use the S-TRIG output of the PRO-2
ANY OTHER
(1/4" jack)
AUX 1 (A)
There is much facility for control on the MS-20
ANY OTHER
(1/4" jack)
AUX 2 (A)
KORG MONOPOLY
KENTON PRO-2
ADDITIONAL INFORMATION
CV IN
(1/4" jack)
CV CHAN (A)
ADJUST THE PRO-2 CV INIT TRIMMER FOR THE
APPROPRIATE CHANNEL TO 1 OCTAVE HIGHER THAN
THE FACTORY DEFAULT
TRIG IN
(1/4" jack)
GATE (A) SET TRIG POLARITY OF THE MONOPOLY TO +15v
VCF fcM IN
(1/4" jack)
AUX 1 (A)
ADJUST THE PRO-2 AUX 1 TRIMMER TO +5 VOLTS
PORTA
(1/4" jack)
AUX 2 (A)
ADJUST THE PRO-2 AUX 2 TRIMMER TO +5 VOLTS
[works inverted] (switches portamento on & off)
ARPEGGIO TRIG IN
(1/4" jack)
ARP CLK
YAMAHA CS-30
KENTON PRO-2
ADDITIONAL INFORMATION
KEY VOLT IN
(1/4" jack)
Hz/V CHAN (A)
Requires the PRO-2 Hz/V option to be fitted