KERN & SOHN ALT 250-4B - Manual (Page 32)

32 ALT_B-PLT_A-PLT_F-BA-e-1333
10.3 Simple weighing
In order to obtain exact weighing results, your balance must have reached the
operating temperature (see warming up time chap. 1).
 Wait for zero display, reset to zero using TARE.
 Place goods to be weighed on balance.
 Wait until the stability display appears [].
 Read weighing result.
When an optional printer is connected, the weighing value can be edited.
Printout examples (KERN YKB-01N):
27-08-11 10:41:17 Current date/time
Weight: 50.5773 g Measuring Value
10.4 Capacity display
The capacity display [] runs from below to above and proceeds
according to the loaded weight on the balance. Its full height is reached at
maximum load.
This is an analogue display of the current allocation of the weighing area.