KERN & SOHN ALT 250-4B - Manual (Page 55)

ALT_B-PLT_A-PLT_F-BA-e-1333 55
 If necessary place a weighing container, confirm the set reference piece number
by pressing the PRINT button.

 Place as many pieces to add-up as required by the set reference piece number.
 Acknowledge using PRINT button and wait for stability display.
As soon as the weighing result is stable, the determined average piece weight will
be taken over as reference weight.
The currently placed weight „W“, the reference weight „MPW“ and the piece number
„PCS“ are displayed.
 Remove reference weight. The balance is now in parts counting mode counting
all units on the weighing pan.