Disabling and resetting intellibeam, At the rearview mirror, Cleaning the intellibeam – Cadillac 2010 Escalade User Manual

Page 206: Light sensor

Advertising
background image

Disabling and Resetting IntelliBeam

®

at the

Rearview Mirror

IntelliBeam

®

can be disabled by using the controls on

the inside rearview mirror.

AUTO

3

(On/Off): To disable the system, press this

button on the inside rearview mirror. The IntelliBeam

®

indicator will turn off and will not come back on until the
IntelliBeam

®

button is pressed again.

(Stalk Disable) : When IntelliBeam

®

has turned on the

high-beams, pull or push the high-beam stalk. This will
disable IntelliBeam

®

. The IntelliBeam

®

indicator on the

mirror will turn off. To re-enable IntelliBeam

®

, press the

IntelliBeam

®

button on the mirror.

A different sensitivity setting is available for dealer
diagnostics. This is done by pushing and holding this
button for 20 seconds until the IntelliBeam

®

indicator

light flashes three times. If you accidentally activate
this, the vehicle's setting will automatically be reset
each time the ignition is turned off and then on again.

Cleaning the IntelliBeam

®

Light Sensor

The light sensor is located
on the inside of the
vehicle in front of the
inside rearview mirror.

Clean the light sensor window, periodically, using glass
cleaner on a soft cloth. Gently wipe the sensor window.
Do not spray glass cleaner directly on the surface of the
sensor window.

4-14

Advertising
This manual is related to the following products: