Kuzma STOGI REF 313 110513 - Manual (Page 6)

3.3. Setting up the tonearm:
3.3.0. Headshell removal and fixing:
This tonearm has a detachable headshell and fixing and positioning it has no negative effect on
tonearm performance. The whole headshell is fixed with one Allen key 2 mm. Insert it in the
top hole and release screw with Allen key for at least one turn (ACW). (Fig.2&3)
Disconnect cartridge pins, remove Allen key and pull out the headshell. (Fig.4)
Fix the cartridge and return headshell back into the tube. If it can not be inserted easily, rotate
the screw a little more in ACW direction. Then fix it back in CW direction with gentle force,
around one turn.
Fig.2 Locked Fig.3 Unlocked
Note: Do not over-tighten the screw which locks the headshell.
Fig.4 Removing headshell
3.3.1. Connecting tonearm:
Check the horizontal movement of the tube to ensure that the headshell will reach the inner
grooves.
Due to the high tonearm mass, turntable leveling and suspension should be checked and
adjusted according to the turntable manual.
6