Kuzma Stabi XL 2000 User Manual
Page 8
8
Setting the VTA Guage:
With Allen key 1.5 mm release the small brass weight which holds the display in the upper
position. The display will show minimum. Reset and the measurement will show zero. Lift
the vertical rod for about 6-7 mm (middle) and with Allen key, secure this position with the
screw on the brass weight. Then again reset and it will show that this new position is zero.
Raising the VTA by rotating the toothed knob, will show increased height above this
reference point in mm and lowering it will show minus numbers. The precision achieved by
this is 0.01 mm. If the change in height of the tonearm comes outside this range of
measurement, the brass weight can be repositioned. The measuring device will not be
damaged by being outside its range. Each rotation of the knob corresponds to 1mm change
in VTA and can even be moved while playing records.