Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 10)

Page | 10
Fig. 4.4. Frame & bath-side view-observe height Fig. 4.5. Frame & bath- top view
Connecting motor and spindle position: Fig. 5.0.
Plug in DC voltage adaptor at the back of motor housing, plug into mains and switch on motor. Fit over the
frame spindle in a such way that the black tooth wheel is on the top of the tooth wheel in the motor housing.
You should notice slow rotation and hear a little rattling noise.
Fig. 5.0. Motor, switch, plug in DC supply Fig. 5.1. Spindle in the rotating position
Spindle positions: Fig. 6.0.
Position the heavy black metal stand about 0.5m away from the frame. Insert spindle in the central
vertical position of the bush. This is the position for fitting or removing records. Fig. 6.0.- 6.1.
The tilt position is the drying position. See Fig. 10.2.