Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 13)

Page | 13
Fig. 9.0. Holding spindle with LPs Fig. 9.1. Lowering spindle in the rotation position
Fig. 9.2. Spindle position in bath- side view 1 Fig. 9.3. Spindle position – side view 2
When you are satisfied switch on rotation and ensure records rotate. The water level should be below the
black spacers or labels. If necessary retighten records by pushing the clamp towards the records.
When you switch on the ultrasonic power and you may notice bubbles forming inside the bath or on the
record surfaces. The cleaner the record, the less bubbles will be seen. Do not forget that the main aim is
cleaning inside the record grooves and these bubbles are NOT visible. You will see your records shinier
then ever after the cleaning process.
If the water wets the labels- do not worry as it will dry up without any damage.
Fig. 9.4. Water level below record label. Fig. 9.5. Gap between edge of bath and LPs