Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 11)

Page | 11
Fig. 6.0. Spindle in the stand-vertical Fig. 6.1. Spindle with first spacer
Record fitting on the spindle: Fig. 7.0.
For the first time put on a single LP and fit it over the frame to check height and position of the frame over
US bath. Check record position in the bath and if need it reposition large spindle positioner along the spindle
shaft by releasing hex screw with Allen key 2 mm to suit your size bath.
Find a few old records which are not important to have a first test of the ultrasonic cleaning process!
Fit 10 LPs ( start with only few and check bath width) on the spindle using black spacers and finally fix
records down with the clamp. Press and hold button and push it down the spindle with soft tips towards the
records.
Fig. 7.0. One LP on spindle Fig. 7.1. Spacer on top of LP