LABEC J-WD-1 - Manual (Page 10)

6. Trouble shooting.
1. In case apparatus fails to work at all :-
• Control unit switched off :-
=> Ensure unit is on.
• Power supply shortage :-
=> Refer to specification and check whether sufficient power is being supplied.
=> Is the breaker on the side of outer part open?
• Check if lamp is turned down.
=> Check unit in a power outlet that is known to work.
If still does not work, contact your local LABORATORY EQUIPMENT PTY LIMITED agent/distributor &
have it repaired.
2. In the machine inclined?
Install the machine horizontally all the time.
• In case general failure :-
=> Check unit in a power outlet that is known to work.
If still does not work, contact your local LABORATORY EQUIPMENT PTY LIMITED agent/distributor &
have it repaired.
7. After-sales service.
7.1 Free repair
Faults which is responsible for manufacture in normal condition can be repaired with free for 1year from
purchase date (only, pressure vessel is no warranty), and it is desirous to check following items when
requesting A/S.
• Part and condition generated fault
(It is necessary to explain in detail within limit of possibility)
. Model name
. Serial Number
. Purchase date (year, month, date)
7.2 Chargeable repair
In the following cases, the customer will be required to pay for the following repairs:
- Fault by user mistake, unsuitable repair or modification
- Fault by negligence for carrying and handling during use
- Fault due to natural disasters such as fire, flood disaster and abnormal voltage
- Fault by using against direction for use.