LABEC J-WD-1 - Manual (Page 4)

SAFETY SYMBOLS
This operation manual and this product use the following safety symbols. Please keep in mind the
meaning of each of the symbols to ensure safe use of the product and to prevent any damages,
accidents, or problems resulting from negligence of these safety symbols. (As using symbols may
depend on the product, not all of the symbols may be used.)
SAFETY SYMBOLS
SAFETY SYMBOLS
Indicates the possibility of
personal injury or death. Never
fail to follow the operating
procedure.
Do not proceed beyond a
WARNING sign until the noted
conditions are fully met to
satisfactory and understood.
Indicates the existence of
possibility of damage to the
product or to the operator in
operation.
Never fail to follow the
operating procedure.
Indicates the existence of
possibility of damage to the
product or to the operator in
operation when cautions are
not observed and followed
properly.
Indicates additional information
such as general warning,
caution, risk of danger, and
operating procedure.
When this mark is indicated on
the product, refer the relevant
section of the Operation
Manual.