Lippert Components Ground Control 3.0 User Manual
Page 15
Advertising
![background image](/manuals/698165/15/background.png)
Rev: 01.30.2015
Page 15
Ground Control 3.0 Service Manual
Fig. 23
7. Attach the replacement rear sensor (Fig. 23B) to the mounting plate (Fig. 23C) using two 3⁄8" hex head
self tapping screws (Fig. 23A). Orientation is imperative for the correct operation of the leveling system.
A
B
C
Fig. 24
8. Attach the mounting plate (Fig. 24B) and replacement sensor (Fig. 24C) assembly to the crossmember
(Fig. 24D) using two 3⁄8" hex head self tapping screws (Fig. 24A). Ensure that the plate is centered side
to side on the frame and that the sensor is oriented properly (Fig. 24).
A
B
C
D
x
x
Advertising