Lippert Components Xl Hydraulic Slideout And Hydraulic Landing Gear (hlg) System - Manual (Page 7)

NOTE: The Lippert XL Hydraulic Slideout and HLG System is designed to operate
as a negative ground system. A negative ground system utilizes the chassis
frame as the ground source. An independent ground wire back to the battery is
not needed. It is important the electrical components have good wire to chassis
contact. Over 90% of unit electrical problems can be attributed to bad ground
connections.
NOTE: For long-term storage: It is recommended that the room be closed
(retracted) and if your unit is equipped with the IRC room control, it is
recommended all of the control knobs be kept in the closed position.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONSULT YOUR LOCAL
AUTHORIZED DEALER OR CALL LIPPERT AT:
(866) 524-7821.
7