Lippert Components Above Floor Slideout System - Manual (Page 3)

SYSTEM
WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING MAY
RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The Lippert Above Floor Slideout System is intended for the sole
purpose of extending and retracting the slideout room. It’s
function should not be used for any other purpose or reason than
to actuate the slideout room. To use the system for any reason
other than what it is designed for may result in damage to the
coach and/or cause serious injury or even death.
Before actuating the system, please keep these things in mind:
1. Parking locations should be clear of obstructions that may
cause damage when the slideout room is actuated.
2. Be sure all persons are clear of the coach prior to the
slideout room actuation.
3. Keep hands and other body parts away from slideout
mechanisms during actuation. Severe injury or death may
result.
4. To optimize slideout actuation, park coach on solid and level
ground.
DESCRIPTION
The Lippert Above Floor Slideout System is a rack and pinion style slide system.
Utilizing a bi-directional electric motor to actuate the drive shaft, the slideout
room is extended and retracted from the same source. The actuator has a built-
in automatic braking feature. The Lippert Above Floor Slideout System is
designed as a negative or positive ground system.
There are no serviceable parts within the electric motor. If the motor fails, it must
be replaced.
Disassembly of the motor voids the warranty.
Mechanical portions of the slideout system are replaceable. Contact Lippert
Components, Inc. to obtain replacement parts.
PRIOR TO OPERATION
Prior to operating the Lippert Above Floor Slideout System, follow these four (4)
guidelines:
1. Coach should be parked on the most level surface available.
2. The PARKING BRAKE must be engaged.
3. The coach’s transmission must be in PARK.
4. The coach’s ignition must be in the ON or RUN position or the coach’s
engine must be running. (Class A and C only; Gas and Diesel)
3