Lippert Components Above Floor Slideout System - Manual (Page 9)

NOTE: For long-term storage: It is recommended that the room be closed
(retracted).
• Visually inspect the Slide Floor and Drive Box Assemblies. Refer to Fig. 1 for
location of rail assemblies. Check for excess build-up of dirt or other foreign
material; remove any debris that may be present.
• If the system squeaks or makes any noises it is permissible to apply a coat
of lightweight oil to the drive shaft and roller areas but remove any excess oil
so dirt and debris do not build-up. DO NOT use grease.
WARNING!
DO NOT WORK ON YOUR SLIDEOUT SYSTEM UNLESS THE BATTERY IS
DISCONNECTED.
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING MAY RESULT
IN SERIOUS PERSONAL INJURY OR DEATH.
SERVICE
TROUBLESHOOTING
The Lippert Above Floor Slideout System is only one of four inter-related slideout
room system components. These four components are as follows: Chassis,
Slideout room, Coach and Lippert Above Floor Slideout System. Each one
needs to function correctly with the others or misalignment problems will occur.
Every coach has it’s own personality and what may work to fix one coach may
not work on another even if the symptoms appear to be the same.
When something restricts room travel, system performances will be
unpredictable. It is very important that slide rails, rack and pinion be free of
contamination and allowed to travel freely the full distance or “STROKE.” Debris
may build-up during travel is an example of some types of contamination that
may occur.
When beginning to troubleshoot the system, make sure the battery is fully
charged, there is no visible signs of external damage to the actuator, motor or
rails and that the motor is wired properly and all connections are secure.
You can adjust room extension by modifying the position of the rack gear on the
slide floor rail to the pinion gear on the gear assembly.
During troubleshooting, remember, by changing, altering or adjusting one thing, it
may affect something else. Be sure any changes do not create a new problem.
Additional information on the Lippert Sofa Slideout System by calling 866-
524-7821 and asking for technical assistance.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, CONSULT YOUR LOCAL
AUTHORIZED DEALER, GO ONLINE; www.lci1.com OR CALL LIPPERT AT:
(866) 524-7821.
9