Longshine LCS-C841MC - Manual (Page 20)

1000Base-T to 1000Base-SX/LX Converter
16
Powering On Unit
The Converter uses external power supply 12V DC at
0.8A, frequency 50~60 Hz.
1. Insert the power cable plug directly into the receptacle
located at the back of the device.
2. Plug the power adapter into an available socket.
3. Check the rear-panel LED as the device is powered
on to verify that the Power LED is lit. If not, check that
the power cable is correctly and securely plugged in.
Note: For International use, you may need to change the AC power
adapter cord. You must use a power cord set that has been
approved for the receptacle type and electrical current in your
country.