Installing the converter, Warning – Longshine LCS-C841MC User Manual
Page 31
Advertising
1000Base-T to 1000Base-SX/LX Converter
27
Installing the Converter
Once the Converter has been attached to the bracket, it
can be installed into the Chassis. Special care must be
taken to ensure the correct mating of the power connector.
Align the converter so that it fits between the upper and
lower guide rails.
Warning
Always ensure that the converter power
socket is positioned at the base of the Chassis. Never
force the Converter into the Chassis - check power
socket position and alignment.
Advertising