Longshine LCS-GS8208-A V.2 - Manual (Page 21)

20
DSCP mode QoS:
The DSCP mode QoS gives packet priority by the DSCP information
attaching on the incoming packets.
To configure DSCP Based QoS configuration:
1.
Select “DSCP” in the “Mode” column for those ports that are going to
perform DSCP-based QoS. Click the “Apply” button.
2. Click the “DSCP priority” button. The “DSCP Priority Setting” page
shows up.
3. Give the priorities as high or low for each DSCP information types.
4. Click the “Apply” button again to execute your configuration.