Longshine LCS-GS8208-A V.2 - Manual (Page 41)

40
SNMP Setup [enable|disable]
Description:
Activate or deactivate the SNMP.
[enable|disable]: Enable/disable SNMP (default: Show SNMP mode).
SNMP Trap [<IP Address>]
Description:
Set or show SNMP traps destination.
<IP Address>: IP address to send traps to. (default: Show trap
configuration)
Storm Control Commands
Commands at Storm Control level:
Storm Control Configuration
Storm Control Setup <traffic type > <option>
Storm Control Configuration
Description:
Show the Storm Control setting.
Storm Control Setup <traffic type > <option>
Description:
Set or show the storm control configuration. The allowed frame rates for
multicast and broadcasts are
controlled using a central storm controller.
<traffic type>: Storm controller to set. Can be one of:
[Broadcast|Multicast]
(default: Show all).
[disable | <rate>]: Disable storm controller or set the rate in kiloframes
Allowed values are 2k, 4k, 8k, 16k, 32k, 64k
61NB-G708A+200