Longshine LCS-GS8208-A V.2 - Manual (Page 7)

6
LED Definition
LED for the device:
The switch provides a power LED for the device.
LED Status Operation
Steady Green The switch is powered on
Power
Off The switch is powered off
LED for each port:
The switch provides one “1000M” LED and one “10/100M” LED for each port.
1000M LED: Shows the current transmitting/receiving speed of the
port.
10/100M LED: Shows the link status and the activities on the port.
LED Status Operation
Green The port is connected at 1000 Mbps
Blinking Green A valid link is established, and there is data
transmitting/receiving. 1000M
Off
No valid link on this port or the Port is connected at
10/100 Mbps
Steady Green A valid link is established, and there is no data
transmitting/receiving.
Blinking Green A valid link is established, and there is data
transmitting/receiving.
10/100M
Off
No valid link on this port or the port is connected at
1000 Mbps
Restore Default Button
You can use this button to reset the switch or restore factory default settings.
To reset the switch, press the button once.
To restore factory default settings, press and hold the button for three
seconds.