Longshine LCS-IR2114-D - Manual (Page 16)

IP Sharing Router
- 16 -
A. If you choose “Dynamic IP Address”, the router will automatically receive the IP parameters from your
ISP without needing to enter any parameters. You will see the screen as the below, select the checkbox of
MAC Address
B. If you choose “WAN Static IP”, you should enter the detailed IP information. Click the “Next” button
C. If you choose “PPPoE”, you will see the screen as the following figure, enter the “User Name &
Password & Retype password & Service Name & MTU & Maximum Idle Time”, and then click the “Next”