Longshine LCS-IR2114-D - Manual (Page 9)

IP Sharing Router
- 9 -
1.6 Connecting this Router to your network
Before you install the router, you should connect your PC to the Internet through your broadband service
successfully. If there is any problem, please contact with your ISP for help. After that, please install the
router according to the following steps. Don’t forget to pull out the power plug and keep your hands dry.
1. Connect the PC(s) and all Switched/Hubs on your LAN to the LAN Ports on the router.
2. Connect the DSL/Cable modem to the WAN port on the router.
3. Connect the AC power adapter to the AC power socket on the router, and the other end into an
electrical outlet. The router will start to work automatically.
4. Power on your PC(s) and Cable/DSL modem.
Note:
Do not use this product near water, for example, in a wet basement or neat a swimming pool. Avoid using
this product during an electrical storm. There may be a remote risk of electric shock from lightning
1.7 Application Scenario