Longshine LCS-WARC-N - Manual (Page 36)

Wireless 11n 1T1R Router
36
Items Information
Disable WPS Click this checkbox to undo WPS.
WPS Status
You cannot manually select the items here. The WPS Status will change
from “UnConfigured” to “Configured” after you enable WPS function and
setup a wireless security key for this device.
Self-PIN Number
If you use this device as a client, you can use this code when trying to
connect this device to other AP by using the PIN method.
Push Button
Configuration
Push Button Communication (PBC) method uses a simple action of
pushing a button on both the AP and the new STA to reach the function
of easy setup WPS connection. You can simply click the
button in this GUI page or click the WPS button under the case of the
router. After click on the button, please run the client’s WPS and push
the PBC button within 2 minutes.
Current Key Info This field displays the current key information you configured.
Client PIN
Number
Personal Identification Number (PIN) method. Users have to fill in the
PIN code of enrollee device and click the button to make
communication between the AP and the enrollee device. After click on
the button, please run the client’s WPS and push the PIN button within 2
minutes.
*Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.