Wireless 11n 1t1r router – Longshine LCS-WARC-N User Manual

Page 9

Advertising
background image

Wireless 11n 1T1R Router

9

1.4 The Rear Panel

The rear panel of the Wireless Router is shown below.

LAN: Through this port, you can connect the router to your PCs and the other Ethernet

network devices.

WAN: This WAN port is where you will connect the cable/DSL Modem, or Ethernet.

DC IN:

Plug the circle end of the power adapter firmly into the rear panel of the router, and put the

other end into an electric service outlet, then the system is ready.

WPS/Reset Button:

Click this button for once it means to start PBC configuration method, in which users can

easy setup WPS connection.

If you push the button for more than 5 seconds and then release it, the system will return to

factory default setting. In the meantime, system rewrites flash to default value and then

system reboot. Approximately 60 seconds later, the whole system parameters have returned

to factory default value. If the process has been interrupted by any reason(like power off), the

system will fail. Before perform the process, please ensure a safe operating environment!

Antenna (W142B/W142D only): The function of the antenna is to enhance the wireless

signal and expand the range of signal.

W142A W142C

W142B W142D

Advertising